HyperLynx SI

服務內容

Hyperlynx SI GHz

HyperLynx GHz includes a complete suite of tools for pre- and post-layout signal integrity,
crosstalk and EMC analysis, including multi-gigabit per second SERDES interconnects.

Major product benefits:
• Industry leading ease of use
• Accurate modeling of lossy transmission-line effects, including skin effect and dielectric loss
• Analyze inter-symbol interference in multi-gigabit signals, including random jitter, eye diagrams, and eye masks to define keepout regions
• Simulate with SPICE or IBIS models
• Advanced via modeling
• Differential signal simulation and analysis, including impedance planning and optimization of differential terminations
• Terminator Wizard™ recommends optimal termination strategies, including series termination, parallel, parallel AC, and differential
• Provides an early look at likely EMC failures, including both radiation and trace current analysis
• Works with all major PCB layout and routing applications

Overview
Increasingly fast edge-rates in today’s integrated circuits (ICs) cause detrimental high-speed effects, even in PCB designs running at low operating frequencies. As driver ICs switch faster, a growing volume of boards suffer from signal degradation, including over/undershoot, ringing, glitching, crosstalk, and timing problems. When degradation becomes serious enough, the logic on a board can fail-making otherwise excellent designs stare blankly into space.
HyperLynx® EXT — including LineSim™ for pre-layout analysis and BoardSim™ for post-route analysis — targets designs at frequencies up to about 300 MHz. At higher speeds, transmission-line losses (including skin effect and dielectric loss) and via parasitics take on increasing importance; the HyperLynx GHz bundle models all of these effects and addresses the special needs of SERDES design.

Complete SI and EMC Analysis Suite
Signal integrity and timing analysis, for most engineers, is only one of many systems design tasks. A software tool that's easy to learn and easy to relearn is a necessity with today's schedule pressures.
Hardware engineers, PCB designers and signal integrity specialists alike can use HyperLynx as a team; getting simulation results without requiring weeks of software training. The emphasis is on getting designs right the first time, avoiding costly overdesign, and saving recurrent layout, prototype and test cycles in the lab.
With HyperLynx, you can address high-speed PCB problems throughout the design cycle, beginning at the earliest architectural stages and moving through post-layout verification. The process is as easy as using an oscilloscope or spectrum analyzer in the lab, and at a fraction of the cost.

LineSim GHz
Pre-layout simulation with LineSim GHz, part of HyperLynx GHz, allows you to predict and eliminate signal integrity problems early, allowing you to proactively constrain routing, plan stackups, and optimize clock, critical signal topologies and terminations prior to board layout. LineSim’s intuitive drag-and-drop transmission-line modeling approach is an ideal way to “get it right” the first time.
• Quickly enter complex interconnect scenarios, including ICs, transmission lines, cables, connectors and passive components
• Simulate immediately, using industry-standard IBIS models, HyperLynx’s 18,000 model IC library, generic models, or build your own models from databook information
• Visual IBIS Editor allows you to check and edit IBIS models including a heirarchical, newer, automated syntax checking V/I-V/t auto-correction and drag and-drop curve editing
• Easily instantiate and simulate HSPICE or Eldo models (SPICE software sold separately)
• Start from scratch or use one of the design kits for Xilinx RocketIO, Altera Stratix-GX, PCI-X, USB and more

Analyze inter-symbol interference in multi-gigabit signals, includingrandom jitter, eye diagrams and eye masks to define keepout
regions

BoardSim GHz
Post-layout signal integrity simulation with BoardSim GHz, part of HyperLynx GHz, allows you to analyze signal integrity and timing at three important stages: following part placement in your PCB layout system, after critical net routing, and after detailed routing of an entire board.
• Batch simulation automatically scans large numbers of nets on an entire PCB, flagging SI and EMC hot spots
• Interactive analysis takes you to the next level, simulating batch analysis-identified trouble spots
• Quick Terminators allow new termination components to be inserted on-the-fly, enabling real-time analysis
• Accurately predicts crosstalk waveforms for any trace topology and IC placement, also showing board designers specific cross-sections in violation of crosstalk thresholds
• Powerful, easy to use multi-board analysis, including support for EBD models

BoardSim-compatible PCB layout systems:
• Mentor Graphics PADS® Layout, Expedition™ and Board Station®
• Cadence Allegro, SPECCTRA and OrCAD Layout
• Altium Protel and P-CAD
• Intercept Pantheon
• Zuken CADStar, Visula and CR3000/5000 PWS or Board Designer

便服店
免費註冊

氮氣瓶租借費用報價:您好,請問貴公司有提供氮氣瓶租借服務嗎?請問可提供報價單以及告知租借方式嗎?謝謝

團體制服詢價單 以下報價:您好,我們想要訂製反光背心,請問是否有提供訂製,我們這邊有樣式模擬圖 數量需求是595件,想先詢問價格與報價單

  • FUJIFILM APEOS C325Z A4彩色雷射複合機:您好,請提供這台FUJIFILM APEOS C325Z A4彩色雷射複合機的報價,

    生命禮儀 以下協助報價:自醫院接大體至入塔(塔位已備),不辦公祭,只有家祭

  • 公務用黑色原子筆:1000支多少錢 2000支多少錢

    做檔期 以下協助:今年將拭賣 以您店內這種ㄧ份2個50元 3天預計要3-4000個 實計數量會因排的位置有所改變 請問批發價多少?有含醬跟辣嗎? 給我們的時後是常溫還是冷凍

    自我檢測風量計詢價:自我檢測風量計詢問費用是多少錢?

    鋼製的手套- 鋸台切片使用詢價單:您好,我們有興趣購買您的鋼製手套,用於鋸台切片使用。請提供以下信息: 1. 該手套的材質是什麼?是否具有防切割功能?是的 2. 請問您的手套是否具有尺寸選擇,以確保合適的配戴?男生 使用 感謝!

    冷燙液 詢價費用:想了解冷燙藥水的價錢, 滿多少可以送?

    本所庫房消防設備改善設計與施作估價單:一、基本資料 1.名稱:公路局臺北區監理所C棟檔案庫房 2.地點:新北市樹林區中正路248巷7號 3.建築物狀況:鋼構屋頂,兩面磚牆,兩面矽酸鈣板分間牆,單一出入口 4.樓地板面積:約97.4平方公尺(約29.5坪) 5.樓層數:1層 二、詢價目的 為消防申報合格證明且參加機關金檔獎,須委託專業技師進行消防設計與設備施工,預計採「設計+施工統包方式」。 三、金檔獎消防規範 1.檔案庫房設置火警探測器與警報設備 2.檔案庫房設置消防滅火器(氣體式滅火器)或設備 3.檢視消防安全設備檢修及申報合格證明文件 煩請提供消防設計圖說估價單與消防申報合格證明所需消防設備估價單,謝謝!

    是否有做過有機的產品:是否有做過有機驗證的產品,有代工服務嗎

    請問一下豬大骨1包是幾公斤,多少錢 :請問一下豬大骨1包是幾公斤,多少錢?

    詢問 Centron 血袋管封口機型態及報價:您好: 我司目前有採購桌上型血袋管封口機的需求, 想請教 Centron 血袋管封口機是攜帶型還是桌上型? 另想一併詢問產品報價,謝謝您。

    代理商產品詢價單:您好,我們公司對貴公司的產品感興趣,希望能獲得以下信息: 1. 請問貴公司的產品是否提供代理商價格或折扣? 2. HFB-R2416TZ 我們公司是一幫國外企業設計代工代料目前需長期定期購買的料,請問可以報價給我嗎?

    購新上市光泉新庄青草茶:想購買100瓶 請問有優惠否 信用卡付款

    vildeon filter採購需求,自家公司裝備使用,非銷售:本公司多樣纜線裝備上都設置空氣過濾網,以前皆採荷蘭直送,現在想要在台找到品質、貨源穩定的供應商,謝謝!

    防爆燈具是否有認證資料:防爆燈具是否有認證資料

    關於OEM委託生產的諮詢:您好,我們公司對於OEM委託生產有興趣,想了解貴公司的相關服務。請問: 1. 我想問貴司是否有OEM冰糖糖包

    120kg桶裝液態氮:請問120kg桶裝液態氮,1kg報價多少

    南亞PVC管件費用:請幫我報價南亞PVC管件 PVC 管帽 8" 1只 PVC 單片式法蘭 8" 10K 5只 PVC 厚管 8" 1支 PVC 盲法蘭 8"10K 1只 NBR 迫緊 8" 10K 5片 PVC 管帽 12" 1只 PVC 單片式法蘭 12"10K 5只 PVC 厚管 12" 1支 PVC 盲法蘭 12" 10K 1只 NBR 迫緊 12" 10K 5片

    關鍵字:HyperLynx,SI,Signal,Integrity,Simulatio

    邏輯分析儀、示波器、任意波形產生器、電子負載、設計服務

    1. 統一編號25137616
    2. 手  機0955547256
    3. 更多資訊邏輯分析儀、示波器、任意波形產生器、電子負載、設計服務
    網頁更新日:

    相關服務

    1. 再生能源(太陽能,風力發電..)系統設置與碳權交易
      1.再生能源(太陽能發電,風力發電系統設置碳權規劃認證與交易
    2. 變頻器安裝維修,泵浦節能系統
      泵浦、變頻器、泵浦變頻節能系統、泵浦節能系統、變頻節能系統、工業變頻器、變頻器維修
    3. 以客為尊,為客戶量身打造,提供網路全方位及特殊技
      以客為尊,為客戶量身打造,提供網路全方位及特殊技術專業服務
    4. HyperLynx SI
      Hyperlynx SI GHz
    5. 自動化設備系統規劃,機器手臂設計,PLC人機程式
      全能自動化企業社提供:自動化設備規劃,機器手臂設計,人機程式

    友站分享

    奇美物流股份有限公司
    汎茂科技股份有限公司
    兆昇電線電纜有限公司(各大電線電纜廠代理經銷商)